The F126-EL flow computer has been developed to calculate corrected liquid volume at normal conditions. The corrected volumetric flow is calculated by measuring the uncorrected volumetric flow and actual line temperature which is processed with the thermal expansion coefficient algorithm stored in the flow computer. The reference temperature can be defined as desired (e.g. 15°C, 20°C or 60°F). 
The display shows the compensated flow rate, total, accumulated total and the actual line temperature. On-screen engineering units like Nm³ are easily configured from a comprehensive selection. 

Features

• Calculates compensated flow rate, total and accumulated total based on a temperature/expansion relationship.
• Displays actual line temperature.
• Analog output signal reflecting the corrected flow rate.
• Displays total and flow rate simultaneously.
• Flow rate: seven 8mm (0.31") digits.
• Total - resettable: seven 17mm (0.67") digits.
• Accumulated total - not resettable: eleven 8mm (0.31") digits.
• Temperature: six 17mm (0.67") digits.
• Engineering units for flow rate, total and temperature on the display.
• Green LED backlight.
• Auto backup of settings and running totals in EEPROM memory.
• Operational temperature: -40°C to +80°C (-40°F to 176°F).

Applications

• The F-Series is your first and best choice for field mount indicators. Especially in harsh weather conditions like rain, snow, salty atmospheres and temperatures between -40°C up to +80°C (-40°F up to 176°F) for safe and hazardous area applications!
• Applications where net flow calculation of liquids at normal conditions is desired without the influence of thermal product expansion. 

• Robust IP66, IP67 (NEMA4X) field enclosure. It is so rugged, you can even stand on it!
• Intrinsically Safe available - ATEX, IECEx, FM and CSA approval for gas and dust applications.
• Programming can be done by your own crew, with the sensible menu-driven structure, saving cost and irritation. Know one, know them all!
• Very diverse mounting possibilities: walls, pipes, panels or directly onto outdoor sensors.

Fluidwell F126-EG

The F126-EG flow computer has been developed to calculate corrected gas volume at normal conditions. The corrected volumetric flow is calculated by measuring the uncorrected volumetric flow, actual line temperature and pressure which are processed with the equations stored in the flow computer. A compressibility factor can be set to approach a real gas behavior. The reference conditions can be defined as desired (e.g. 15°C or 60°F and 1.013 bar). 
The display shows the compensated flow rate, total, accumulated total and the actual line temperature and pressure. On-screen engineering units like Nm³ are easily configured from a comprehensive selection..

Features

• Calculates compensated flow rate, total and accumulated total based on a temperature/expansion relationship.
• Displays actual line temperature.
• Analog output signal reflecting the corrected flow rate.
• Displays total and flow rate simultaneously.
• Flow rate: seven 8mm (0.31") digits.
• Total - resettable: seven 17mm (0.67") digits.
• Accumulated total - not resettable: eleven 8mm (0.31") digits.
• Temperature: six 17mm (0.67") digits.
• Engineering units for flow rate, total and temperature on the display.
• Green LED backlight.
• Auto backup of settings and running totals in EEPROM memory.
• Operational temperature: -40°C to +80°C (-40°F to 176°F).

Applications

• The F-Series is your first and best choice for field mount indicators. Especially in harsh weather conditions like rain, snow, salty atmospheres and temperatures between -40°C up to +80°C (-40°F up to 176°F) for safe and hazardous area applications!
• Applications where net flow calculation of liquids at normal conditions is desired without the influence of thermal product expansion. 

• Robust IP66, IP67 (NEMA4X) field enclosure. It is so rugged, you can even stand on it!
• Intrinsically Safe available - ATEX, IECEx, FM and CSA approval for gas and dust applications.
• Programming can be done by your own crew, with the sensible menu-driven structure, saving cost and irritation. Know one, know them all!
• Very diverse mounting possibilities: walls, pipes, panels or directly onto outdoor sensors

The F127 flow computer has been developed to calculate corrected differential liquid volume at normal conditions. This is calculated by measuring the uncorrected volumetric flow and actual line temperature in both the supply and return line. These signals are processed with the thermal expansion coefficient algorithm stored in the flow computer. The reference temperature can be defined as desired (e.g. 15°C, 20°C or 60°F). The usual difficulties encountered in such applications include: pulsating flows, very low consumption readings, vibration and high ambient temperatures. These are all well catered for in the design and operation of the F127.
The display shows the compensated consumption / flow rate, total, accumulated total and actual line temperatures. On-screen engineering units like Nm³ are easily configured from a comprehensive selection. 

Features

• Displays corrected consumption (flow rate), total and accumulated total.
• Supply line: displays actual temperature and corrected flow rate.
• Return line: displays actual temperature and corrected flow rate.
• Analog output signal reflecting the corrected consumption / flow rate.
• Displays total and flow rate simultaneously.
• Large digit selection for flow rate or total.
• Flow rate: seven 17mm (0.67") or 8mm (0.31") digits.
• Total - resettable: seven 17mm (0.67") digits.
• Accumulated total - not resettable: eleven 8mm (0.31") digits.
• Temperature: six 17mm (0.67") digits.
• Engineering units for flow rate, total and temperature on the display.
• Green LED backlight.
• Auto backup of settings and running totals in EEPROM memory.
• Operational temperature: -40°C to +80°C (-40°F to 176°F).

Applications

• The F-Series is your first and best choice for field mount indicators. Especially in harsh weather conditions like rain, snow, salty atmosphers and temperatures between -40°C up to +80°C (-40°F up to 176°F) for safe and hazardous area applications!
• Net fuel consumption calculation for diesel engines on board of ships or locomotives, generators or burners, corrected for the influence of thermal product expansion. 

• Robust IP66, IP67 (NEMA4X) field enclosure. It is so rugged, you can even stand on it!
• Intrinsically Safe available - ATEX, IECEx, FM and CSA approval for gas and dust applications.
• Programming can be done by your own crew, with the sensible menu-driven structure, saving cost and irritation. Know one, know them all!
• Very diverse mounting possibilities: walls, pipes, panels or directly onto outdoor sensors.

The F114 flow computer calculates the actual ratio between two separate flows. It offers the ability to set one low ratio and one high ratio alarm value. Special precautions are taken to allow start-up problems and incorrect ratio readings for a certain period of time. Based on the location of the flowmeters, a selection can be made out of six different formulas.
The display shows the ratio, alarm values, flow rate A, total A and flow rate B, total B. On-screen engineering units are easily configured from a comprehensive selection. The ratio can be displayed as 1:__ or as a percentage. 

Features

• Calculates ratio between flow A and B.
• Displays ratio, flow rate A and B and total A and B.
• Ratio monitoring: two alarm values can be set: low and high ratio alarm.
• Alarm values can be changed by the operator or they can be passcode protected.
• Six ratio calculation formulas.
• Ratio: seven 17mm (0.67") digits, displayed as 1:__ or percentage.
• Flow rate A and B: seven 17mm (0.67") digits.
• Total A and B - resettable: seven 17mm (0.67") digits.
• Separate engineering units for flow rate and total on the display.
• Up to three configurable alarm outputs.
• Displays clear alarm messages.
• Green LED backlight.
• Auto backup of settings and running totals in EEPROM memory.
• Operational temperature: -40°C to +80°C (-40°F to 176°F).

Applications

• The F-Series is your first and best choice for field mount indicators. Especially in harsh weather conditions like rain, snow, salty atmosphers and temperatures between -40°C up to +80°C (-40°F up to 176°F) for safe and hazardous area applications!
• Mixing or blending of two components where continuous ratio displaying, monitoring and totalizing is important. For example in construction works, roof or wall isolation, gluing and coating.

• Robust IP66, IP67 (NEMA4X) field enclosure. It is so rugged, you can even stand on it!
• Intrinsically Safe available - ATEX, IECEx, FM and CSA approval for gas and dust applications.
• Programming can be done by your own crew, with the sensible menu-driven structure, saving cost and irritation. Know one, know them all!
• Very diverse mounting possibilities: walls, pipes, panels or directly onto outdoor sensors.

The F116 flow computer has been developed to calculate differential / consumption or total volume. The usual difficulties encountered in such applications include: pulsating flows, very low consumption readings, vibration and high ambient temperatures. These are all well catered for in the design and operation of the F116. The pulse and analog outputs do reflect the calculated differential or sum value.
The display shows flow rate, total and accumulated total. On-screen engineering units are easily configured from a comprehensive selection. 

Features

• Calculates differential flow rate (consumption), total and accumulated total of flow A and B.
• Calculates the sum flow rate, total and accumulated total of flow A and B.
• Precautions for pulsating flows and very low consumption readings.
• Analog and pulse outputs.
• Displays total and flow rate simultaneously.
• Large digit selection for flow rate or total.
• Flow rate: seven 17mm (0.67") or 8mm (0.31") digits.
• Total - resettable: seven 17mm (0.67") digits.
• Accumulated total - not resettable: eleven 8mm (0.31") digits.
• Separate engineering units for flow rate and total on the display.
• Green LED backlight.
• Auto backup of settings and running totals in EEPROM memory.
• Operational temperature: -40°C to +80°C (-40°F to 176°F).

Applications

• The F-Series is your first and best choice for field mount indicators. Especially in harsh weather conditions like rain, snow, salty atmosphers and temperatures between -40°C up to +80°C (-40°F up to 176°F) for safe and hazardous area applications!
• Differential function: fuel consumption calculation for diesel engines on board of ships or locomotives. 
  Sum function: where flows are split-up in two pipe-lines and total flow has to be calculated. 

• Robust IP66, IP67 (NEMA4X) field enclosure. It is so rugged, you can even stand on it!
• Intrinsically Safe available - ATEX, IECEx, FM and CSA approval for gas and dust applications.
• Programming can be done by your own crew, with the sensible menu-driven structure, saving cost and irritation. Know one, know them all!
• Very diverse mounting possibilities: walls, pipes, panels or directly onto outdoor sensors.