The F010 is a local indicator with large 26mm (1") high digits which displays the actual flow rate. The measuring and time unit to be displayed below the flow rate are simply selected through an alphanumeric configuration menu. No adhesive labels have to be put on the outside of the enclosure: a weather proof and user-friendly solution!
The configuration of K-factors or Span and number of decimals is done through software functions, without any sensitive DIP-switches or trimmers.

Features

• Displays instantaneous flow rate, measuring and time unit.
• Very large 26mm (1") high digits for flow rate.
• Selectable on-screen engineering units for flow rate: mL, L, m³, mg, g, kg, ton, GAL, bbl, lb, cf, REV, scf, Nm³, NL, P or no unit.
• Selectable on-screen time units for flow rate: /sec, /min, /hour or /day.
• Number of digits for flow rate: 5½.
• Piegraph indication: ten segments.
• Green or amber LED backlight with adjustable intensity.
• Auto backup of settings in EEPROM memory.
• Easy configuration with clear alphanumerical display.
• Operational temperature: -40°C to +80°C (-40°F to 176°F).

Applications

• The F-Series is your first and best choice for field mount indicators. Especially in harsh weather conditions like rain, snow, salty atmospheres and temperatures between -40°C up to +80°C (-40°F up to 176°F) for safe and hazardous area applications!
• The F010 fits in flow measurement applications where a local flow rate indication is required without signal re-transmission or totalizer functionality.

• Robust IP66, IP67 (NEMA4X) field enclosure. It is so rugged, you can even stand on it!
• Intrinsically Safe available - ATEX, IECEx, FM and CSA approval for gas and dust applications.
• Programming can be done by your own crew, with the sensible menu-driven structure, saving cost and irritation. Know one, know them all!
• Very diverse mounting possibilities: walls, pipes, panels or directly onto outdoor sensors.

The F011 is a local indicator which displays the running total and accumulated total simultaneously. Total can be reset to zero by pressing the CLEAR button twice. The accumulated total can register up to 11 digits and is backed-up in EEPROM memory every minute, just as the running total. The measuring unit to be displayed is simply selected through an alphanumeric configuration menu. No adhesive labels have to be put on the outside of the enclosure: a weather proof and user-friendly solution!

Features

• Displays total and accumulated total simultaneously.
• Total - resettable: seven 17mm (0.67") digits.
• Accumulated total - not resettable: eleven 8mm (0.31") digits.
• Selectable on-screen engineering units for totalizers: ml, L, m³, GAL, USGAL, kg, lb, bbl or no unit.
• Green or amber LED backlight with adjustable intensity.
• Auto backup of settings and running totals in EEPROM memory.
• Easy configuration with clear alphanumerical display.
• Operational temperature: -40°C to +80°C (-40°F to 176°F).

Applications

• The F-Series is your first and best choice for field mount indicators. Especially in harsh weather conditions like rain, snow, salty atmosphers and temperatures between -40°C up to +80°C (-40°F up to 176°F) for safe and hazardous area applications!
• Flow measurement where a local totalizer function is required without flow rate or signal re-transmission functionality.

• Robust IP66, IP67 (NEMA4X) field enclosure. It is so rugged, you can even stand on it!
• Intrinsically Safe available - ATEX, IECEx, FM and CSA approval for gas and dust applications.
• Programming can be done by your own crew, with the sensible menu-driven structure, saving cost and irritation. Know one, know them all!
• Very diverse mounting possibilities: walls, pipes, panels or directly onto outdoor sensors.

The F012 is our most popular model. This local indicator displays the actual flow rate, total and accumulated total. Total can be reset to zero by pressing the CLEAR button twice. The accumulated total can register up to 11 digits and is backed-up in EEPROM memory every minute, just as the running total.

On-screen engineering units are easily configured from a comprehensive selection.

Features

• Displays total and flow rate simultaneously.
• Large digit selection for flow rate or total.
• Flow rate: seven 17mm (0.67") or 8mm (0.31") digits.
• Total - resettable: seven 17mm (0.67") digits.
• Accumulated total - not resettable: eleven 8mm (0.31") digits.
• Separate engineering units for flow rate and total.
• Selectable on-screen engineering units for flow rate: mL, L, m³, mg, g, kg, ton, GAL, bbl, lb, cf, REV, scf, Nm³, NL, P or no unit.
• Selectable on-screen time units for flow rate: /sec, /min, /hour or /day.
• Selectable on-screen engineering units for totalizer: ml, L, m³, GAL, USGAL, kg, lb, bbl or no unit.
• Green or amber LED backlight with adjustable intensity.
• Auto backup of settings and running totals in EEPROM memory.
• Easy configuration with clear alphanumerical display.
• Operational temperature: -40°C to +80°C (-40°F to 176°F).

Applications

• The F-Series is your first and best choice for field mount indicators. Especially in harsh weather conditions like rain, snow, salty atmosphers and temperatures between -40°C up to +80°C (-40°F up to 176°F) for safe and hazardous area applications!
• Flow measurement where a local totalizer function is required without flow rate or signal re-transmission functionality.

• Robust IP66, IP67 (NEMA4X) field enclosure. It is so rugged, you can even stand on it!
• Intrinsically Safe available - ATEX, IECEx, FM and CSA approval for gas and dust applications.
• Programming can be done by your own crew, with the sensible menu-driven structure, saving cost and irritation. Know one, know them all!
• Very diverse mounting possibilities: walls, pipes, panels or directly onto outdoor sensors.

The D010 is a local, panel mount indicator to display the actual flow rate. The measuring and time unit to be displayed are simply selected through an alfa-numerical configuration menu. No adhesive labels have to be put on the outside of the enclosure: a weather proof and user friendly solution! The configuration of K-factors or Span and number of decimals is done through software functions, without any sensitive dip-switches or trimmers.

Features

• Displays flow rate and measuring units.
• Very large 26mm (1") digits.
• Piegraph indication: ten segments.
• Selectable on-screen engineering units; volumetric or mass.
• Ability to process all types of flowmeter signals.
• Auto backup of all settings.
• Operational temperature: -40°C to +80°C (-40°F to 176°F).
• LED backlight option.
• Aluminum DIN front panel of 144 x 72mm (5.67" x 2.83") according DIN 43700 / IEC 61554.

Applications

• The D-Series is a DIN-sized display and the better alternative for your existing, not waterproof, front panel mount indicators in extreme weather outdoor applications or e.g. in food industries where working environments are often cleaned with powerful water jets.
• The D010 fits in flow measurement applications where a local flow rate indication is required without re-transmission or totalizer functionality. 

• Unique, robust IP66, IP67 (NEMA4X) panel mount front enclosure made of die cast aluminum, allowing even big jets of water and total immersion.
• Programming can be done by your own crew with the exact same, plain and sensible menu-driven structure like the F-Series, saving cost and irritation. Know one, know them all!

The D011 is a local, panel mount indicator to display the running total and accumulated total. Total can be reset to zero by pressing the CLEAR button twice. A non-resettable accumulated total is available with eleven digits. The measuring unit to be displayed is simply selected through an alfa-numerical configuration menu. No adhesive labels have to be put on the outside of the enclosure: a weather proof and userfriendly solution! 

Features

• Displays running total and accumulated total.
• Large 17mm (0.67") digits for resettable total and 8mm (0.31") for non resettable accumulated total.
• Selectable on-screen engineering units.
• Ability to process all types of flowmeter signals.
• Auto backup of settings and running totals.
• Operational temperature: -40°C to +80°C (-40°F to 176°F).
• LED backlight option.
• Aluminum DIN front panel of 144 x 72mm (5.67" x 2.83") according DIN 43700 / IEC 61554.

Applications

• The D-Series is a DIN-sized display and the better alternative for your existing, not waterproof, front panel mount indicators in extreme weather outdoor applications or e.g. in food industries where working environments are often cleaned with powerful water jets.
• The D011 fits in flow measurement applications where a local totalizer function is required without flow rate or re-transmission functionality.

• Unique, robust IP66, IP67 (NEMA4X) panel mount front enclosure made of die cast aluminum, allowing even big jets of water and total immersion.
• Programming can be done by your own crew with the exact same, plain and sensible menu-driven structure like the F-Series, saving cost and irritation. Know one, know them all!

The D012 is a local, panel mount indicator to display the actual flow rate, total and accumulated total. The total can be reset to zero by pressing the CLEAR button twice. The eleven digit accumulated total however can not be reset to zero. The measuring unit to be displayed is simply selected through an alfa-numerical configuration menu. No adhesive labels have to be put on the outside of the enclosure: a weather proof and userfriendly solution! 

Features

• Displays flow rate, total and accumulated total.
• Large 17mm (0.67") digits for flow rate or total.
• Selectable on-screen engineering units.
• Ability to process all types of flowmeter signals.
• Auto backup of settings and running totals.
• Operational temperature: -40°C to +80°C (-40°F to 176°F).
• LED backlight option.
• Aluminum DIN front panel of 144 x 72mm (5.67" x 2.83") according DIN 43700 / IEC 61554.

Applications

• The D-Series is a DIN-sized display and the better alternative for your existing, not waterproof, front panel mount indicators in extreme weather outdoor applications or e.g. in food industries where working environments are often cleaned with powerful water jets.
• The D012 fits in flow measurement applications where a local flow rate indication and totalizer function is required without re-transmission functionality. 

• Unique, robust IP66, IP67 (NEMA4X) panel mount front enclosure made of die cast aluminum, allowing even big jets of water and total immersion.
• Programming can be done by your own crew with the exact same, plain and sensible menu-driven structure like the F-Series, saving cost and irritation. Know one, know them all!

The F014 is a local indicator which displays the actual flow rate, total and accumulated total. A scaled pulse, related to the accumulated total is generated for re-transmitting the count on the display. Total can be reset to zero by pressing the CLEAR button twice. The accumulated total can register up to 11 digits and is backed-up in EEPROM memory every minute, just as the running total.
On-screen engineering units are easily configured from a comprehensive selection. 

Features

• Scaled pulse output reflecting the accumulated total.
• Displays total and flow rate simultaneously.
• Large digit selection for flow rate or total.
• Flow rate: seven 17mm (0.67") or 8mm (0.31") digits.
• Total - resettable: seven 17mm (0.67") digits.
• Accumulated total - not resettable: eleven 8mm (0.31") digits.
• Separate engineering units for flow rate and total.
• Selectable on-screen engineering units for flow rate: mL, L, m³, mg, g, kg, ton, GAL, bbl, lb, cf, REV, scf, Nm³, NL, P or no unit.
• Selectable on-screen time units for flow rate: /sec, /min, /hour or /day.
• Selectable on-screen engineering units for totalizer: ml, L, m³, GAL, USGAL, kg, lb, bbl or no unit.
• Green or amber LED backlight with adjustable intensity.
• Auto backup of settings and running totals in EEPROM memory.
• Easy configuration with clear alphanumerical display.
• Operational temperature: -40°C to +80°C (-40°F to 176°F).

Applications

• The F-Series is your first and best choice for field mount indicators. Especially in harsh weather conditions like rain, snow, salty atmosphers and temperatures between -40°C up to +80°C (-40°F up to 176°F) for safe and hazardous area applications!
• Flow measurement where re-transmission of the totalizer function is required. 

• Robust IP66, IP67 (NEMA4X) field enclosure. It is so rugged, you can even stand on it!
• Intrinsically Safe available - ATEX, IECEx, FM and CSA approval for gas and dust applications.
• Programming can be done by your own crew, with the sensible menu-driven structure, saving cost and irritation. Know one, know them all!
• Very diverse mounting possibilities: walls, pipes, panels or directly onto outdoor sensors.

The F016 is a local indicator which displays the actual flow rate, total and accumulated total. In addition to the average K-Factor or Span, eight linearization points can be entered with their frequencies or values. The unit will interpolate between these points, greatly enhancing accuracy in any flow range, even for very low frequency applications. 

Features

• Eight point linearization of the flow curve - with interpolation.
• Scaled pulse output reflecting the accumulated total.
• Displays total and flow rate simultaneously.
• Large digit selection for flow rate or total.
• Flow rate: seven 17mm (0.67") or 8mm (0.31") digits.
• Total - resettable: seven 17mm (0.67") digits.
• Accumulated total - not resettable: eleven 8mm (0.31") digits.
• Separate engineering units for flow rate and total.
• Green or amber LED backlight with adjustable intensity.
• Auto backup of settings and running totals in EEPROM memory.
• Easy configuration with clear alphanumerical display.
• Operational temperature: -40°C to +80°C (-40°F to 176°F).

Applications

• The F-Series is your first and best choice for field mount indicators. Especially in harsh weather conditions like rain, snow, salty atmosphers and temperatures between -40°C up to +80°C (-40°F up to 176°F) for safe and hazardous area applications!
• Liquid flow measurement with mechanic flowmeters where a precise calculation over the full measurement range is required.

• Robust IP66, IP67 (NEMA4X) field enclosure. It is so rugged, you can even stand on it!
• Intrinsically Safe available - ATEX, IECEx, FM and CSA approval for gas and dust applications.
• Programming can be done by your own crew, with the sensible menu-driven structure, saving cost and irritation. Know one, know them all!
• Very diverse mounting possibilities: walls, pipes, panels or directly onto outdoor sensors.

The F110 is the most popular model in our range of flow rate / totalizers, complete with pulse and analog output signals. Even demanding applications are catered for with our base unit configuration.
The display shows flow rate, total and accumulated total. On-screen engineering units are easily configured from a comprehensive selection. 

Features

• Analog and pulse outputs.
• Displays total and flow rate simultaneously.
• Large digit selection for flow rate or total.
• Flow rate: seven 17mm (0.67") or 8mm (0.31") digits.
• Total - resettable: seven 17mm (0.67") digits.
• Accumulated total - not resettable: eleven 8mm (0.31") digits.
• Separate engineering units for flow rate and total on the display.
• Green LED backlight.
• Auto backup of settings and running totals in EEPROM memory.
• Operational temperature: -40°C to +80°C (-40°F to 176°F).

Applications

• The F-Series is your first and best choice for field mount indicators. Especially in harsh weather conditions like rain, snow, salty atmosphers and temperatures between -40°C up to +80°C (-40°F up to 176°F) for safe and hazardous area applications!
• Liquid flow measurement where re-transmission of the flow rate and/or totalizer functions or serial communication is required.

• Robust IP66, IP67 (NEMA4X) field enclosure. It is so rugged, you can even stand on it!
• Intrinsically Safe available - ATEX, IECEx, FM and CSA approval for gas and dust applications.
• Programming can be done by your own crew, with the sensible menu-driven structure, saving cost and irritation. Know one, know them all!
• Very diverse mounting possibilities: walls, pipes, panels or directly onto outdoor sensors.

The F111 incorporates two flow rate / totalizers in one enclosure, including a pulse output for each flow. There is no relationship between the flows, even different pulse signal input types can be used.
For each flow, on-screen engineering units are easily configured from a comprehensive selection. The F111 can be set to show the selected information manually or with an automatic toggle function. 

Features

• Two competely separated flow rate / totalizers.
• For each flow one scaled pulse output.
• Displays total, flow rate and product I.D. simultaneously.
• Large digit selection for flow rate or total.
• Flow rates: seven 17mm (0.67") or 8mm (0.31") digits.
• Totals - resettable: seven 17mm (0.67") digits.
• Accumulated totals - not resettable: eleven 8mm (0.31") digits.
• Separate engineering units for flow rates and totals on the display.
• Green LED backlight.
• Auto backup of settings and running totals in EEPROM memory.
• Operational temperature: -40°C to +80°C (-40°F to 176°F).

Applications

• The F-Series is your first and best choice for field mount indicators. Especially in harsh weather conditions like rain, snow, salty atmosphers and temperatures between -40°C up to +80°C (-40°F up to 176°F) for safe and hazardous area applications!
• For those applications where two indicators are required but one single and compact enclosure is desired

• Robust IP66, IP67 (NEMA4X) field enclosure. It is so rugged, you can even stand on it!
• Intrinsically Safe available - ATEX, IECEx, FM and CSA approval for gas and dust applications.
• Programming can be done by your own crew, with the sensible menu-driven structure, saving cost and irritation. Know one, know them all!
• Very diverse mounting possibilities: walls, pipes, panels or directly onto outdoor sensors.

The F115 has been developed for applications where the direction of flow is an issue. It is required to offer two pulse signals from the flowmeter which are 90° or 270° degrees out of phase. In case of a reverse flow, the flow rate will be displayed as a negative value, the totalizers will count down and a switch output will be set. The pulse and analog outputs do reflect both flow directions. 
On-screen engineering units are easily configured from a comprehensive selection. 

Features

• Quadrature input to detect the direction of flow.
• Displays positive and negative flow rate to indicate the flow direction.
• Total and accumulated total count up and down accoording to the flow direction.
• Analog and pulse outputs.
• Displays total and flow rate simultaneously.
• Large digit selection for flow rate or total.
• Flow rate: seven 17mm (0.67") or 8mm (0.31") digits.
• Total - resettable: seven 17mm (0.67") digits.
• Accumulated total - not resettable: eleven 8mm (0.31") digits.
• Separate engineering units for flow rate and total on the display.
• Green LED backlight.
• Auto backup of settings and running totals in EEPROM memory.
• Operational temperature: -40°C to +80°C (-40°F to 176°F).

Applications

• The F-Series is your first and best choice for field mount indicators. Especially in harsh weather conditions like rain, snow, salty atmosphers and temperatures between -40°C up to +80°C (-40°F up to 176°F) for safe and hazardous area applications!

Bi-directional flow measurement applications can be found by loading and unloading of ships where one bi-directional flowmeter is used. An other application is the correction for back-flow due to shocks in a pipeline caused by piston pumps or valve behavior.

• Robust IP66, IP67 (NEMA4X) field enclosure. It is so rugged, you can even stand on it!
• Intrinsically Safe available - ATEX, IECEx, FM and CSA approval for gas and dust applications.
• Programming can be done by your own crew, with the sensible menu-driven structure, saving cost and irritation. Know one, know them all!
• Very diverse mounting possibilities: walls, pipes, panels or directly onto outdoor sensors.

The D014 is a local, panel mount indicator to display the actual flow rate, total and accumulated total. The total can be reset to zero by pressing the CLEAR button twice. The eleven digit accumulated total however can not be reset to zero. Related to the acculmulated total, a scaled pulse is generated for re-transmitting the count on the display. 

Features

• Displays flow rate, total and accumulated total.
• Large 17mm (0.67") digits for flow rate or total.
• Ability to process all types of flowmeter signals.
• Auto backup of settings and running totals.
• Operational temperature: -40°C to +80°C (-40°F to 176°F).
• LED backlight option.
• Aluminum DIN front panel of 144 x 72mm (5.67" x 2.83") according DIN 43700 / IEC 61554.

Applications

• The D-Series is a DIN-sized display and the better alternative for your existing, not waterproof, front panel mount indicators in extreme weather outdoor applications or e.g. in food industries where working environments are often cleaned with powerful water jets.
• The D014 fits in flow measurement applications where re-transmission of the totalizer function is required.

• Unique, robust IP66, IP67 (NEMA4X) panel mount front enclosure made of die cast aluminum, allowing even big jets of water and total immersion.
• Programming can be done by your own crew with the exact same, plain and sensible menu-driven structure like the F-Series, saving cost and irritation. Know one, know them all!

The F013 is a versatile flow rate indicator and totalizer with continuous flow rate monitoring feature. It offers the ability to set one low flow rate and one high flow rate alarm value. If desired, an alarm ignore function can be set up to allow for an incorrect flow rate for a certain period of time. The display shows flow rate, total, accumulated total, alarm values and alarm messages.
On-screen engineering units are easily configured from a comprehensive selection. 

Features

• Flow rate monitoring: two alarm values can be set: low and high flow rate alarm.
• Alarm values can be changed by the operator or they can be passcode protected.
• One alarm output for high, low or both combined flow rate alarms.
• Displays total and flow rate simultaneously.
• Large digit selection for flow rate or total.
• Flow rate: seven 17mm (0.67") or 8mm (0.31") digits.
• Total - resettable: seven 17mm (0.67") digits.
• Accumulated total - not resettable: eleven 8mm (0.31") digits.
• Separate engineering units for flow rate and total.
• Red flashing LED backlight in case of a flow rate alarm; intensity adjustable.
• Displays clear alarm messages.
• Auto backup of settings and running totals in EEPROM memory.
• Easy configuration with clear alphanumerical display.
• Operational temperature: -40°C to +80°C (-40°F to 176°F).

Applications

• The F-Series is your first and best choice for field mount indicators. Especially in harsh weather conditions like rain, snow, salty atmosphers and temperatures between -40°C up to +80°C (-40°F up to 176°F) for safe and hazardous area applications!
• Flow measurement where continuous flow rate monitoring is important without signal re-transmission. 

• Robust IP66, IP67 (NEMA4X) field enclosure. It is so rugged, you can even stand on it!
• Intrinsically Safe available - ATEX, IECEx, FM and CSA approval for gas and dust applications.
• Programming can be done by your own crew, with the sensible menu-driven structure, saving cost and irritation. Know one, know them all!
• Very diverse mounting possibilities: walls, pipes, panels or directly onto outdoor sensors.

The F113 is a versatile flow rate indicator and totalizer with continuous flow rate monitoring feature. It offers the ability to set two low flow rate and two high flow rate alarm values. If desired, an alarm ignore function can be set up to allow for an incorrect flow rate for a certain period of time. Up to five outputs are available to transmit flow rate, alarm conditions and accumulated total.
The display shows flow rate, total, accumulated total, alarm values, alarm messages and status. On-screen engineering units are easily configured from a comprehensive selection. 

Features

• Flow rate monitoring: four alarm values can be set: low-low, low, high and high-high flow rate alarm.
• Alarm values can be changed by the operator or they can be passcode protected.
• Alarm ignore function allows an incorrect flow rate for a certain period of time.
• Analog and pulse outputs.
• Displays total and flow rate simultaneously.
• Large digit selection for flow rate or total.
• Flow rate: seven 17mm (0.67") or 8mm (0.31") digits.
• Total - resettable: seven 17mm (0.67") digits.
• Accumulated total - not resettable: eleven 8mm (0.31") digits.
• Separate engineering units for flow rate and total on the display.
• Up to four configurable alarm or scaled pulse outputs.
• Displays clear alarm messages.
• Green LED backlight.
• Auto backup of settings and running totals in EEPROM memory.
• Operational temperature: -40°C to +80°C (-40°F to 176°F).

Applications

• The F-Series is your first and best choice for field mount indicators. Especially in harsh weather conditions like rain, snow, salty atmosphers and temperatures between -40°C up to +80°C (-40°F up to 176°F) for safe and hazardous area applications!
• Liquid flow measurement where continuous flow rate monitoring is important. Also re-transmission of the flow rate and/or totalizer functions or serial communication is required. 

• Robust IP66, IP67 (NEMA4X) field enclosure. It is so rugged, you can even stand on it!
• Intrinsically Safe available - ATEX, IECEx, FM and CSA approval for gas and dust applications.
• Programming can be done by your own crew, with the sensible menu-driven structure, saving cost and irritation. Know one, know them all!
• Very diverse mounting possibilities: walls, pipes, panels or directly onto outdoor sensors.

The F117 has been developed for applications where the totalized quantity has to be monitored and not the flow rate.
When a start command is given, the totalizer is reset to zero. The amount of product measured from that moment is monitored continously for high totalizer values. Monitoring for low totalizer values will commence after a stop command is given or after a pre-defined time.
The display shows the preset and actual totalized value, percentage and flow rate. The totalizer alarms are clearly indicated and two outputs are available to transmit alarm conditions. The analog output value mirrors the measured quantity in relation to the preset value. For remote control, an external start and stop input is availble as standard. 

Features

• The desired totalized (preset) quantity can be set by the operator.
• Totalizer monitoring: two alarm values can be set: low and high totalizer alarm.
• Alarm values can be changed by the operator or they can be passcode protected.
• Analog output signal reflecting the totalized value or flow rate.
• Quadrature input to detect the direction of flow.
• Total and accumulated total count up and down accoording to the flow direction.
• Displays total and preset value or percentage simultaneously.
• Flow rate: seven 17mm (0.67") digits (shown after stop command).
• Total - reset after a start-command: seven 17mm (0.67") digits.
• Accumulated total - not resettable: eleven 8mm (0.31") digits.
• Displays clear alarm messages.
• Green LED backlight.
• Auto backup of settings and running totals in EEPROM memory.
• Operational temperature: -40°C to +80°C (-40°F to 176°F).

Applications

• The F-Series is your first and best choice for field mount indicators. Especially in harsh weather conditions like rain, snow, salty atmosphers and temperatures between -40°C up to +80°C (-40°F up to 176°F) for safe and hazardous area applications!
• Automated processes where a minimum and / or a maximum dispensed quantity has to be monitored continuously.

• Robust IP66, IP67 (NEMA4X) field enclosure. It is so rugged, you can even stand on it!
• Intrinsically Safe available - ATEX, IECEx, FM and CSA approval for gas and dust applications.
• Programming can be done by your own crew, with the sensible menu-driven structure, saving cost and irritation. Know one, know them all!
• Very diverse mounting possibilities: walls, pipes, panels or directly onto outdoor sensors.

The F118 is a versatile flow rate indicator and totalizer with the ability to precisely linearize the flowmeter signal. In addition to the average K-Factor or Span, ten linearization points can be entered with their frequencies or values. The unit will interpolate between these points, greatly enhancing accuracy in any flow range, even for very low frequency applications. Moreover, a continuous flow rate monitoring feature is available with high and low flow rate alarm values and up to three alarm outputs. Flow rate and total are transmitted with an analog and scaled pulse output.
The display shows flow rate, total, accumulated total, alarm values, alarm messages and status. On-screen engineering units are easily configured from a comprehensive selection. 

Features

• Ten point linearization of the flow curve - with interpolation.
• Flow rate monitoring: two alarm values can be set: low and high flow rate alarm.
• Alarm values can be changed by the operator or they can be passcode protected.
• Analog and pulse outputs.
• Displays total and flow rate simultaneously.
• Flow rate: seven 8mm (0.31") digits.
• Total - resettable: seven 17mm (0.67") digits.
• Accumulated total - not resettable: eleven 8mm (0.31") digits.
• Separate engineering units for flow rate and total on the display.
• Up to three configurable alarm or scaled pulse outputs.
• Displays clear alarm messages.
• Green LED backlight.
• Auto backup of settings and running totals in EEPROM memory.
• Operational temperature: -40°C to +80°C (-40°F to 176°F).

Applications

• The F-Series is your first and best choice for field mount indicators. Especially in harsh weather conditions like rain, snow, salty atmosphers and temperatures between -40°C up to +80°C (-40°F up to 176°F) for safe and hazardous area applications!
• Liquid flow measurement with mechanic flowmeters where a precise calculation over the full measurement range and continuous flow rate monitoring is required. 

• Robust IP66, IP67 (NEMA4X) field enclosure. It is so rugged, you can even stand on it!
• Intrinsically Safe available - ATEX, IECEx, FM and CSA approval for gas and dust applications.
• Programming can be done by your own crew, with the sensible menu-driven structure, saving cost and irritation. Know one, know them all!
• Very diverse mounting possibilities: walls, pipes, panels or directly onto outdoor sensors.

The D013 is a versatile, panel mount flow rate indicator and totalizer with continous flow rate monitoring feature. It offers the facility to set one low flow rate and one high flow rate alarm value. If desired, a delay function can be set up to allow for an incorrect flow rate for a certain period of time. 

Features

• Displays flow rate, total, accumulated total and flow rate alarm messages.
• Two alarm values can be entered: low and high flow rate alarm.
• Large 17mm (0.67") digits for flow rate or total.
• Ability to process all types of flowmeter signals.
• Auto backup of settings and running totals.
• Operational temperature: -40°C to +80°C (-40°F to 176°F).
• Red flashing LED backlight in case of a flow rate alarm.
• Aluminum DIN front panel of 144 x 72mm (5.67" x 2.83") according DIN 43700 / IEC 61554.

Applications

• The D-Series is a DIN-sized display and the better alternative for your existing, not waterproof, front panel mount indicators in extreme weather outdoor applications or e.g. in food industries where working environments are often cleaned with powerful water jets.
• The D013 fits in flow measurement applications where continuous flow rate monitoring is important. 

• Unique, robust IP66, IP67 (NEMA4X) panel mount front enclosure made of die cast aluminum, allowing even big jets of water and total immersion.
• Programming can be done by your own crew with the exact same, plain and sensible menu-driven structure like the F-Series, saving cost and irritation. Know one, know them all!

The F112 is a versatile flow rate indicator and totalizer with the ability to precisely linearize the flowmeter signal. In addition to the average K-Factor or Span, fifteen linearization points can be entered with their frequencies or values. The unit will interpolate between these points, greatly enhancing accuracy in any flow range, even for very low frequency applications. This linearization affects all displayed information as well as the output signals.
The display shows flow rate, total and accumulated total. On-screen engineering units are easily configured from a comprehensive selection. 

Features

• Fifteen point linearization of the flow curve - with interpolation.
• Analog and pulse outputs.
• Displays total and flow rate simultaneously.
• Large digit selection for flow rate or total.
• Flow rate: seven 17mm (0.67") or 8mm (0.31") digits.
• Total - resettable: seven 17mm (0.67") digits.
• Accumulated total - not resettable: eleven 8mm (0.31") digits.
• Separate engineering units for flow rate and total on the display.
• Green LED backlight.
• Auto backup of settings and running totals in EEPROM memory.
• Operational temperature: -40°C to +80°C (-40°F to 176°F).

Applications

• The F-Series is your first and best choice for field mount indicators. Especially in harsh weather conditions like rain, snow, salty atmosphers and temperatures between -40°C up to +80°C (-40°F up to 176°F) for safe and hazardous area applications!

Liquid flow measurement with mechanic flowmeters where a precise calculation over the full measurement range is required. Also re-transmission of the flow rate and/or totalizer functions or serial communication is desired. 

• Robust IP66, IP67 (NEMA4X) field enclosure. It is so rugged, you can even stand on it!
• Intrinsically Safe available - ATEX, IECEx, FM and CSA approval for gas and dust applications.
• Programming can be done by your own crew, with the sensible menu-driven structure, saving cost and irritation. Know one, know them all!
• Very diverse mounting possibilities: walls, pipes, panels or directly onto outdoor sensors.

The D016 is a loca,l panel mount indicator with linearization to display the actual flow rate, total and accumulated total. The total can be reset to zero by pressing the CLEAR button twice. The eleven digit accumulated total however can not be reset to zero. In addition to the average K-Factor or Span, eight linearization points can be entered with there frequencies or values. The unit will interpolate between these points greatly enhancing accuracy in any flowrange. Even for very low frequency applications is catered for. This linearization affects all displayed information as well as the pulse output.

Features

• Displays flow rate, total and accumulated total.
• Eight point linearization of the flowcurve - with interpolation.
• Large 17mm (0.67") digits for flow rate or total.
• Ability to process all types of pulse flowmeter signals.
• Auto backup of settings and running totals.
• Operational temperature: -40°C to +80°C (-40°F to 176°F).
• LED backlight option.
• Aluminum DIN front panel of 144 x 72mm (5.67" x 2.83") according DIN 43700 / IEC 61554.

Applications

• The D-Series is a DIN-sized display and the better alternative for your existing, not waterproof, front panel mount indicators in extreme weather outdoor applications or e.g. in food industries where working environments are often cleaned with powerful water jets.

The D016 fits in flow measurement applications with mechanical flowmeters where a precise calculation over the full measurement range is required and re-transmission of the totalizer function is desired.

• Unique, robust IP66, IP67 (NEMA4X) panel mount front enclosure made of die cast aluminum, allowing even big jets of water and total immersion.
• Programming can be done by your own crew with the exact same, plain and sensible menu-driven structure like the F-Series, saving cost and irritation. Know one, know them all!

• The F-Series is your first and best choice for field mount indicators. Especially in harsh weather conditions like rain, snow, salty atmosphers and temperatures between -40°C up to +80°C (-40°F up to 176°F) for safe and hazardous area applications!
• Applications where a constant liquid or gas flow is desired without the need to manually control the flow.

• Robust IP66, IP67 (NEMA4X) field enclosure. It is so rugged, you can even stand on it!
• Intrinsically Safe available - ATEX and IECEx approval for gas and dust applications.
• Programming can be done by your own crew, with the sensible menu-driven structure, saving cost and irritation. Know one, know them all!
• Very diverse mounting possibilities: walls, pipes, panels or directly onto outdoor sensors.

Introduction

The F018 is a local indicator with linearization, that displays the actual flow rate, resettable total and non-resettable accumulated total. The F-Series is known worldwide as a range of user-friendly indicators. The F018 is even more impressive. The HART communication with specific DD allows you to communicate in an easy way with other smart field devices and control / monitoring systems. 

Linearization

In addition to the average K-Factor or Span, fifteen linearization points can be entered with their frequencies or values. The unit will interpolate between these points greatly enhancing accuracy in any flow range, even for very low frequency applications. This linearization affects all displayed information as well as the signal outputs.

Display

The display has large 17mm (0.67”) and 8mm (0.31”) digits which can be set to show flow rate and totals. On-screen engineering units are easily configured from a comprehensive menu. The accumulated total can register up to 11 digits and is backed-up in EEPROM memory every minute, just as the running total. A smart display update function achieves a readable display even at -40°C / -40°F.

Backlight

For those applications where readability during day and night is an issue, a bi-color backlight is available. Also Intrinsically Safe available.

Configuration

All configuration settings are accessed via a simple operator menu which can be pass-code protected. Each setting is clearly indicated with an alphanumerical description, which avoids confusing abbreviations. Once familiar with one F-series product, you will be able to program all models in all series without a manual.

Analog output signal

The linearised flow rate is re-transmitted with the galvanically isolated 4 - 20mA output signal. With the output signal a filter function is available to smoothen out the signal if desired. The F018 can even be poweredvia the loop-current.

Flow meter input

The F018 accepts most pulse input signals for volumetric flow or mass flow measurement.

• Robust IP67 (NEMA4X) field enclosure. It is so rugged, you can even stand on it!
• Intrinsically Safe available: ATEX and IECEx approval for gas and dust applications. CSA is pending.
• Programming can be done by your own crew, with the sensible menu-driven structure, saving cost and irritation. Know one, know them all!
• Very diverse mounting possibilities: walls, pipes, panels or directly onto outdoor sensors!

• Explosion proof according ATEX, IECEx, FM and CSA C-US.
• Aluminum or high grade stainless steel Exd enclosure.
• Easy installation with the spacious chamber and plug & play connectors.
• Cost saving with an easy to install, 1" NPT thread for direct flow meter mounting.
• Key information at a glance as the display shows flow rate, total, measuring units and a flow rate indicating speedometer.
• High and low flow rate alarm monitoring.
• 16 point linearization of the flow curve - with interpolation.
• 7 digit flow rate / total and 11 digit accumulated total.
• Clear flashing LED backlight in case of an alarm.
• Auto backup of settings and running totals.
• Ambient temperature: -40°C to +70°C (-40°F to 158°F).

• Flow measurement in an explosion proof application with mechanical flow meters, where re-transmission of the totalizer, monitoring of the flow rate and HART communication is required.
• The E018 offers you a flow rate monitor / totalizer designed to be used in rough and tough applications, beyond being just explosion proof. Its sturdy design and ease of use are unequaled by any other explosion proof indicator in the market! The E-Series is always your first and safest choice in explosion proof applications.

• Save time and gain flexibility with the easy-to-operate through glass keypad: no need to remove the front cover or to arrange a work permit.
• Your crew is in control with our highly praised "know one, know them all" configuration structure, saving time, cost and aggravation.
• Durable high grade stainless steel 316L Ex d enclosure for extremely salty atmospheres (offshore).

• Explosion proof according ATEX, IECEx, FM and CSA C-US.
• Aluminum or high grade stainless steel Exd enclosure.
• Easy installation with the spacious chamber and plug & play connectors.
• Cost saving with an easy to install, 1" NPT thread for direct flow meter mounting.
• Key information at a glance as the display shows flow rate, total, measuring units and a flow rate indicating speedometer.
• Easy K-factor and engineering unit configuration for volumetric or mass.
• 7 digit flow rate / total and 11 digit accumulated total.
• Bright LED backlight.
• Data logging to survey information.
• Easy configurable via PC with free downloadable remote configuration tool and special communication cable (ACE01/02/06/07).
• Auto backup of settings and running totals.
• Ambient temperature: -40°C to +70°C (-40°F to 158°F).

• Liquid flow measurement where re-transmission of the flow rate and/or totalizer functions or serial communication is required.
• The E110 offers you a flow rate indicator / totalizer designed to be used in rough and tough applications, beyond being just explosion proof. Its sturdy design and ease of use are unequaled by any other explosion proof indicator in the market! The E-Series is always your first and safest choice in explosion proof applications.

• Save time and gain flexibility with the easy-to-operate through glass keypad: no need to remove the front cover or to arrange a work permit.
• Your crew is in control with our highly praised "know one, know them all" configuration structure, saving time, cost and aggravation.
• Durable high grade stainless steel 316L Ex d enclosure for extremely salty atmospheres (offshore).

The E112 is a popular model in our range of explosion proof flow rate indicators. In addition to the average K-Factor, 16 linearization points can be entered. The unit will interpolate between these points greatly enhancing accuracy in any flow range. The E-series is distinguished by its high quality manufacturing and its functionality driven European design. We believe, it is not just about fulfilling the requirements for explosion proof, but it is about safety during daily operation. Ruggedness and reliability is where Fluidwell stands for and it is now available in a comprehensive well designed and purpose driven Explosion proof flow rate indicator / totalizer. 

• Explosion proof according ATEX, IECEx, FM and CSA C-US.
• Aluminum or high grade stainless steel Exd enclosure.
• Easy installation with the spacious chamber and plug & play connectors.
• Cost saving with an easy to install, 1" NPT thread for direct flow meter mounting.
• Key information at a glance as the display shows flow rate, total, measuring units and a flow rate indicating speedometer.
• 16 point linearization of the flow curve - with interpolation.
• Easy K-factor and engineering unit configuration for volumetric or mass.
• 7 digit flow rate / total and 11 digit accumulated total.
• Bright LED backlight.
• Data logging to survey information.
• Easy configurable via PC with free downloadable remote configuration tool and special communication cable (ACE01/02/06/07).
• Auto backup of settings and running totals.
• Ambient temperature: -40°C to +70°C (-40°F to 158°F).

• Flow measurement with mechanical flow meters where a precise calculation over the full measurement range is required. Or if re-transmission of the flow rate and/or totalizer functions or serial communication is desired.
• The E112 offers you a flow rate indicator / totalizer designed to be used in rough and tough applications, beyond being just explosion proof. Its sturdy design and ease of use are unequaled by any other explosion proof indicator in the market! The E-Series is always your first and safest choice in explosion proof applications.

• Save time and gain flexibility with the easy-to-operate through glass keypad: no need to remove the front cover or to arrange a work permit.
• Your crew is in control with our highly praised "know one, know them all" configuration structure, saving time, cost and aggravation.
• Durable high grade stainless steel 316L Ex d enclosure for extremely salty atmospheres (offshore).

• Reed-switch, NAMUR, NPN/PNP pulse, Sine wave (coil), active pulse signal.
• Different pulse signal types are allowed for input A and B.
• (0)4 – 20mA.
• 0 – 10V DC.

• Remote control: Safety mode which stops the control process and places the valve in a safe position.

• Function: Two alarm outputs for low and high ratio alarm.
• Type: Two passive NPN transistors, active PNP transistors or isolated electro-mechanical relays.

• Function: Control output to position the valve of the additive flow.
• Type: One passive isolated, floating or loop powered 4 – 20mA output or one active (0)4 – 20mA or 0 – 10V DC output.

• Function: All process data and settings can be read and modified through the communication link.
• Protocol: Modbus RTU.
• Interface: RS232 / RS485 2-wire or 4-wire / TTL.
• – HART communication is available with the F018 Flow rate Monitor / Totalizer.

• The F-Series is your first and best choice for field mount indicators. Especially in harsh weather conditions like rain, snow, salty atmosphers and temperatures between -40°C up to +80°C (-40°F up to 176°F) for safe and hazardous area applications!
• Applications where a constant ratio between a main flow and an addititve flow is desired (e.g. applications like glueing, blending or mixing) without the need to manually control the additive flow. 
• Alternative basic model: F114.

• Robust IP66, IP67 (NEMA4X) field enclosure. It is so rugged, you can even stand on it!
• Intrinsically Safe available - ATEX and IECEx approval for gas and dust applications.
• Programming can be done by your own crew, with the sensible menu-driven structure, saving cost and irritation. Know one, know them all!
• Very diverse mounting possibilities: walls, pipes, panels or directly onto outdoor sensors.

Above and beyond requirements

Housing

The robust stainless steel 316L E-Series housing is designed to guarantee safety. It takes the E115 bi-directional flow rate indicator / totalizer beyond the legislative requirements for hazardous areas. In the harshest conditions of punishing weather, desert and maritime climates and extreme temperature fluctuations, the durable E-Series consistently delivers accurate measurements. A solid die cast aluminum housing with the same ingress protection rating is available for cost-effective applications.

Operating

The E115 is extremely practical in use. The through-glass keypad enables you a safe and effortless operation of all functionalities without having to open the cover. The menu, display and navigation structure are designed according to the Fluidwell “know one, know them all” principle, which enhances easy and intuitive control of various Fluidwell totalizers, flow computers and other displays.

• Saves time and improves flexibility with the through-glass keypad: no need to open the front cover
• Familiar easy operation with the Fluidwell "Know one, know them all" configuration structure, saving time, cost and aggravation.
• Easy installation in spacious chamber and plug & play connectors.
• Reduces costs with the easy to install 1” NPT thread for direct flow meter mounting.
• Durable high-grade stainless steel 316L Ex d enclosure withstanding extreme (maritime) conditions.
• Key information at a glance: forward/reverse flow rate, forward & reverse total and accumulated total count up and count down ref. flow direction, measuring units and a flow rate indicating speedometer.