SITRANS P transmitter is used for hydrostatic level measurements. It is immersed in the process connected by a vented cable. The sensor has a stainless steel enclosure and is suitable for applications ranging from drinking water to corrosive liquids.

Model: SITRANS P MPS

Accuracy: ≤ 0.3%

Long term stability: ≤ 0.2%/12 Months

Measuring range:   0 - 2 mH2O (0 - 6.6 ftH2O) to
                                    0 - 20 mH2O (0 - 66 ftH2O)

• Compact design
• Carefully selected material
• Cable length: 
  Explosion protection certificate - ATEX II 1 G EEx ia IIC T4

The SITRANS LH100 series pressure transmitter converts the level-proportional hydrostatic pressure into a standardized signal 4 to 20 mA. The transmitter consists of a stainless steel housing (Ø 23,4 mm) with mechanical protection IP 68, a piezo-resistive sensor with ceramic diaphragm. The transmitter cable has a diameter of Ø 6 mm and also contains a vent pipe for connection to the atmosphere.

• Compact design
• Corrosion resistant material
• Housing: Stainless Steel 316L
• Cable: Sheath Made of PE
• Cable length: standard 10, 20 or 30 m, special length up to 50 m possible
• Explosion protected version acc. ATEX II 1 G Ex ia IIC T4 Ga and IEC Ex Ex ia IIC T4 Ga available