What if you could have precise ± 0.5 mm tank level data and at the same time comply with the latest and coming overfill standards?

Get certified custody transfer accuracy with the 5900S level gauge. It measures equally well on all storage tank types and products ranging from liquefied gas, light products, to heavy fuel oil and bitumen.

Reduce uncertainty, and enable accurate net volume calculations in a high performance tank gauging system with 5900S used together with average temperature measurement devices. Tank data is transmitted to the control room and displayed on a host computer or the TankMaster inventory software package 

Increase safety and reliability with the 5900S. It is available with SIL 2,  and SIL 3 certification. The gauge is bus powered for convenient and safe 2-wire installation. 

The unique 2-in-1 solution gives safety benefits, increased reliability, and installation savings by using two independent radar units in one housing.

Achieve cost savings, a quick installion, and get access of all data with the wireless option. A wired system can be used in parallel with a wireless connection to provide redundancy.

• Highest accuracy for inventory and custody transfer for various tank types and products
• Different antenna options: Parabolic, Horn, Still-pipe Array, LPG/LNG
• Non-contacting, making the gauges virtually unaffected by process conditions
• 2-in-1 gauge option for cost-efficient redundancy
• Wireless version available for cost-efficient installation, to utilize more data and get redundant communication possibilities
• SIL 2 and SIL 3 certified by Exida according to IEC 61508-2 and 61508-3
• TÜV-tested and approved for overfill protection according to WHG regulations
• No moving parts, means little or no maintenance
• Installation is normally made with the tank in operation (except for pressurized tanks)

Covering your basic needs in Tank Gauging

What if you could get cost-efficient and reliable level data in your tank farm operations?

Rosemount 5900C measures equally well on all storage tank types and products ranging from liquefied gas, light products, to heavy fuel oil and bitumen. Its ± 3 mm accuracy makes it suitable where medium accuracy is preferred and highest SIL safety rating is not a priority.

5900C can be used together with average temperature measurement devices. Tank data is transmitted to the control room and displayed on a host computer or the TankMaster inventory software package.

Achieve cost savings, a quick installation, and get access to all data with the wireless option. A wired system can be used in parallel with a wireless connection to provide redundancy.

The gauge is bus powered for convenient and safe 2-wire installation.

• Suitable for various tank types and products
• Available with different antenna options: parabolic, cone, still-pipe array, LPG/LNG
• Non-contacting, making the gauges virtually unaffected by process conditions
• Wireless version available for cost-efficient installation, to utilize more data and get redundant communication possibilities
• SIL 2 certified by Exida according to IEC 61508-2 and 61508-3
• No moving parts, means little or no maintenance
• Installation is normally made with the tank in operation (except for pressurized tanks)

• Direct Switch Technology enables a stronger signal than other 2-wire GWR transmitters, providing better measurement capability and reliability.
• Probe End Projection allows for measurement on very low dielectric products over long ranges.
• Verification Reflector function provides simple and safe transmitter integrity testing straight from the control room.
• Improved EMC performance with a Smart Galvanic Interface increases safety.
• Easy integration into new or existing plants with a choice of 4-20 mA with superimposed HART, modbus output, or FOUNDATION ™ fieldbus with extensive support forPlantWeb® Alerts.
• Powerful and easy-to-use configuration tools.
• A wide range of probe styles to cover virtually any applications including extreme temperature and pressure probes for demanding environments.
• Robust modular design and MultivariableTM transmitter resulting in low cost and increased safety.
• Virtually unaffected by application conditions such as dust, vapor and interfering obstacles.
• Certified per IEC61508 for SIL2 in single mode and SIL3 in redundant mode
• Rosemount 9901 – high quality chambers for process level instrumentation

Guided Wave Radar is a continuous level measurement technique that offers several advantages. It is virtually unaffected by temperature, pressure and vapor gas mixtures. It has no moving parts and therefore requires little or no maintenance. It measures the level directly and is therefore unaffected by most fluid property changes, including but not limited to density and viscosity changes. Additionally, the Rosemount 5300 Series offers the following benefits:

• Higher measurement reliability and capability resulting in improved process uptime through
• Robust design resulting in reduced operating costs and safety
• Easy commissioning resulting in reduced startup costs through

Radar is a continuous level measurement technique that offers several advantages. It is virtually unaffected by temperature, pressure and vapor gas mixtures. It is a non-contacting method with no moving parts and therefore requires little or no maintenance. It measures the level directly and is therefore unaffected by most fluid property changes, including but not limited to density and viscosity changes.

Applications:

The Rosemount 5400 Series can be used for continuous non-contacting level and volume measurements of liquids and semi-liquids. The unchallenged Signal-to-Noise ratio in conjunction with a wide range of antennas and the flexibility of having a low- and high frequency version make it suitable for almost any application in the process industry. 

• Buffer Tanks 
  For measurements in tanks with a calm or slightly turbulent surface, the Rosemount 5400 Series transmitter is the preferred choice, particularly where the tank has a narrow nozzle opening. 
• Chambers and stilling wells
  The 5400 is an excellent choice for level gauging in tanks with stilling wells. It may also be used in some chambers, but Guided Wave Radar is generally the best fit for these applications.
• Reactor Tanks 
  The state-of-the art signal processing provided by the 5400 makes it a very suitable choice for tanks with harsh and varying process conditions.

The high quality and reliable Rosemount 565/566 Multiple Spot Temperature Sensor (MST) measures temperature with a number of Pt-100 spot elements placed at different heights to provide a tank temperature profile and an average temperature. Rosemount 566 is used for cryogenic applications.

Only the fully immersed elements are used to determine product temperature.

The spot elements are placed in a flexible gas and condensation tight stainless steel tube.

A flange can be attached to a top fitting and the tube can be anchored to the bottom.

Rosemount 565/566 is easy to install, even if the tank is in service. In pressurized tanks the MST can be installed in a closed thermowell so that it can be removed for service or inspection while the tank is in operation.

For LPG tanks, single spot temperature sensors in thermowells are used.

Rosemount 565/566 is connected to the 2240S Temperature Transmitter.

A water level sensor or a junction box can be integrated to the multiple spot temperature sensors.

• Highest reliability and custody transfer accuracy with up to 14 Pt-100 sensor elements
• Rugged design for harsh environments
• Available with 1/6 and 1/10 DIN B temperature accuracy class
• Wide range of accessories includes anchor weights, flanges, vapor boots, junction boxes
• Thermowell available for single spot version.
• Version with integrated water level sensor is available
• Easy integration in Rosemount Tank Gauging System (sometimes connected directly into gauge)

The ultra-stable high performance 2240S Multi-input Temperature Transmitter is approved for demanding custody transfer applications, which require very accurate level and temperature measurements for net standard volume calculations.

2240S can connect up to sixteen 3- or 4-wire temperature spot elements and an integrated water level sensor.

The value from each individual spot temperature element, in combination with the level value from the radar gauge is used for average liquid temperature calculation.

2240S has an impressive temperature conversion accuracy of ± 0.05 °C (± 0.09 °F).

• Ultra-stable with an impressive temperature conversion accuracy of 
  ± 0.05 °C (± 0.09 °F) suitable for demanding custody transfer applications
• IP 66/67 and Nema 4X certified robust design makes it suitable for installation in harsh environments
• Connects sixteen 3- or 4-wire temperature spot elements and an integrated water level sensor
• Built-in on-line calibration feature

Rosemount 2410 handles communication between the field devices and the control room, and it is available in two versions, for single or multiple tanks. It also feeds power to the Rosemount field devices on the FISCO compliant intrinsically safe Tankbus.

The tank hub collects measurement values, such as level, temperature, and pressure. It calculates average temperature, observed density and strapping table based volume. Such data can be presented on the optional integrated back-lit display, a separate 2230 display, or be sent to TankMaster or a host system.

It is equipped with an integrated FISCO-certified IS barrier, has power conditioner functionality, and built-in electronics for bus termination.

Rosemount 2410 can be equipped with two solid state relays which can be configured to be controlled by level, temperature, and water level.

The Hub is SIL 2 and SIL 3 certified, and a third relay is dedicated for SIL overfill functionality. This relay is part of a separate SIL alarm channel, which has an independent software function, controlling the relay and providing extensive diagnostics. It is activated both if the alarm level is reached and/or if a device malfunction occurs, and operates in a normally closed mode. The output can be connected to an emergency shut-down (ESD) system.

• Handles communication between field devices and control room
• Communicates with the devices on one or several tanks via the intrinsically safe FISCO Tankbus
• Communicates with a host or field communication unit via TRL2 Modbus, RS485, Enraf, HART/WirelessHART
• Supports autoconfiguration of the Tankbus (identifies and autoaddresses field devices in the network)
• Calculates average temperature, observed density and strapping table based volume 
• Supplies power to the units on the Tankbus
• Features integrated IS barrier, power conditioner functionality, and built-in bus termination
• Two user configurable solid state relays
• Separate relay dedicated for SIL alarm channel

The Rosemount 2160 Field Communication Unit is a data concentrator that continuously polls data from field devices via the Rosemount 2410 Tank Hub. The 2160 stores data in a buffer memory. Whenever a request for data is received, it can immediately send data from a group of tanks from the updated buffer memory.

The 2160 acts as a slave on the group bus and as a master on the field bus. The unit has six communication ports. The ports can be individually configured as either group bus ports or as field bus ports. There are three possibilities:

• 4 field bus ports, 2 group bus ports.
• 3 field bus ports, 3 group bus ports.
• 2 field bus ports, 4 group bus ports.

Each field bus can connect maximum 16 devices (however max. 8 are recommended).

• Can communicate with a wide range of hosts
• RS232, RS485 and TRL2 Modbus communication possibility
• Flexible configuration of six communication ports, to be used for field or group buses (2+4, 3+3, or 4+2)
• Redundant options for higher safety

Rosemount 2230 Graphical Field Display presents inventory tank gauging data such as level, temperature, and pressure. This back-lit userfriendly display is designed for tough environments, and can be installed in hazardous (Ex) areas, on the tank roof or foot. It is approved for legal custody transfer.

Rosemount 2230 can display data with different view options from devices connected to a 2410 tank hub for maximum 10 tanks. Up to three displays can be connected to one Tankbus.

The four softkeys allow you to navigate through the different menus to provide all tank data, directly in the field.

The 2230 display is powered by the FISCO Tankbus.

Remote read-out of calculated data such as level, average temperature, pressure and volume

·         Back-lit with excellent readability

·         Easy to install and use

·         Navigation with 4-key display keyboardNavigation with 4-key display keyboard

·         Different view options

·         Robust, weather / dirt protection

The System Hub transfers real time tank gauging data from field devices to the TankMaster Inventory Management System and/or a Host/DCS system.

It has eight configurable ports for host or field device communication.

• Ensure fast data update rate
• Serves up to 64 tanks
• Benefit from scalable options for all system sizes
• Get flexible, and configurable multiple port connectivity

Achieve record productivity

·         Reduce maintenance and downtime with the industry’s most reliable, highest performing pressure transmitter

·         Detect process and electrical loop issues before they impact production with Advanced Diagnostics

Keep your operation on spec

·         Tighten process control with Ultra and Ultra for Flow performance classes

·         Gain tighter control of your level applications with Electronic Remote Sensors (ERS)

Enhance energy efficiency

·         Effectively track usage of steam and natural gas with MultiVariable Flowmeters

·         Reduce permanent pressure loss by up to 96% with Annubar Flowmeters

Safeguard your people, facility, and the environment

·         Quickly and cost effectively add new points to eliminate operator rounds with Wireless

·         Limit worker exposure to hazardous areas or dangerous heights with Remote Display and Interface

Universal package to suit virtually all liquid applications

The Rosemount 2120 is based on vibrating short fork technology, making it suitable for virtually all liquid applications. Features include a complete range of process connections, wide choice of housing and wetted parts materials, five different switching functions, extended fork lengths, hazardous area, basic self-checking functionality, and overfill approvals. The 2120 can withstand temperatures up to 302 °F (150 °C) and pressures to 1450 psig (100 barg). This combination of features makes it configurable to almost all requirements.

The Rosemount 2120 has been TUV tested and approved for overfill protection according to the German DiBt/ WHG regulations. It is certified under safety devices for tanks and piping related to water pollution control.

• Function virtually unaffected by flow, bubbles, turbulence, foam, vibration, solids content, coating products, liquid properties, and product variations
• No need for calibration and requires only a minimum amount of installation
• Easy terminal access and hook-up with electrical protections
• No moving parts or crevices means virtually no maintenance
• Basic electronic self-checking and condition monitoring
• Visible Heartbeat LED shows device status
• Adjustable Switching Delay for turbulent or splashing applications
• Local Magnetic Test Point makes functional test easy
• Small in size and weight
• Short fork for minimized protrusion into pipework
• Extended lengths up to 157.5-in. (4 m)
• "Fast Drip" Fork Design gives quicker response time
• General area, Explosion-proof ⁄ Flameproof, and Intrinsically Safe options

Superior performance and reliability in challenging applications

Based on the same vibrating short fork technology as the Rosemount 2120, the Rosemount 2130 delivers increased safety with certification to the IEC 61508 safety standard for SIL 2 safety instrumented systems with an SFF greater than 90% (subject to selected output type), and extends our coverage to include the more challenging applications in many industries.

Features include a complete range of process connections, wide choice of housing and wetted parts materials, different switching functions, extended fork lengths and hazardous area approvals, making the Rosemount 2130 suitable for virtually all liquids.

The Rosemount 2130 continuously performs advanced instrument health self-checking of the fork and sensor. These diagnostics can detect external damage to the forks, internal damage to the sensor, excessive corrosion and over-temperature.

The Rosemount 2130 can withstand liquid temperatures from -94 to 500 °F (-70 to 260 °C) and process pressures to 1450 psig (100 barg).

The Rosemount 2130 has been TUV tested and approved for overfill protection according to the German DiBt/ WHG regulations. It is certified under safety devices for tanks and piping related to water pollution control.

• Function is virtually unaffected by flow, bubbles, turbulence, foam, vibration, solids content, coating products, liquid properties, and product variations
• No need for calibration and requires only a minimum amount of installation
• Easy terminal access, and safe and easy hook-up with electrical protection features
• No moving parts or crevices means virtually no maintenance
• Advanced electronic instrument health and self-checking of the fork and sensor
• Visible Heartbeat LED shows device status and health
• Adjustable Switching Delay for turbulent or splashing applications
•  Local Magnetic Test Point makes functional test easy
• Short fork for minimized protrusion into pipework
• Extended lengths up to 157.5-in. (4 m)
• “Fast Drip” Fork Design gives quicker response time
• General area, Explosion-proof/Flameproof and Intrinsically Safe options
• Increased safety with certification to the IEC 61508 safety standard for SIL 2 safety instrumented systems.

SmartPower™ Solutions are designed to be Intrinsically Safe. This allows the power modules to be quickly changed in the field. Power module life is specified under installed conditions for predictable life expectancy of up to 10 years. Low level alerts allow easy scheduling of maintenance.  Robust design  allows use in harsh environments. Keyed connections allow easy and fail-safe replacements.

Energy harvesting converts un-used energy, such as vibration, from pumps and motors, into electric energy that is used to power wireless transmitters. Perpetuum’s Intelligent Power Module is a battery module equipped with additional circuitry that facilitates the use of external power sources to supplement battery power in industrial wireless transmitter applications.