SITRANS TR200 is designed to support all common RTDs, thermocouples, resistance and Millivolt sensors. Setup is quick and easy with the transmitter-modem and SIPROM T software. This configuration tool can be downloaded free. Unique user-friendly details are implemented: Without opening the 4-20mA loop, the output current can be read out directly with a multimeter. A red/green LED shows the technician the status at a glance.

• Measures temperature with a linear output signal
• high accuracy across entire ambient temperature range
• Reduces plant noise
• Alarm signal for sensor break or short-circuit according NAMUR 43
• Electro magnetic compatibility (EMC) according DIN EN 61326 and NE21
• Galvanic insulation for accuracy and safety in thermocouple applications
• Single- or dual-point trim
• Custom characteristic curve for application of non-standard sensors
• Difference- and average- measurement
• Explosion protected versions for Europe
• Rugged design, potted electronics

SITRANS TR300 with HART- protocol is designed to support all commons, thermocouples, resistance and Millivolt sensors. Setup is quick and easy with SIMATIC PDM or handheld communicator. Unique user-friendly details are implemented: Without opening the 4-20mA loop the output current can be read out directly with a multimeter. A red/green LED shows the technician the status at a glance.

• Measures temperature with a linear output signal
• High accuracy across entire ambient temperature range
• Reduces plant noise
• Alarm signal for sensor break or short-circuit according NAMUR 43
• Electro magnetic compatibility (EMC) according DIN EN 61326 and NE21
• Galvanic insulation for accuracy and safety in thermocouple applications
• Single- or dual-point trim
• Custom characteristic curve for application of non-standard sensors
• Difference- and average- measurement
• Extensive diagnosis: e.g. drag indicator and time meter
• Set of output current for simulation
• Explosion protected versions for Europe
• Rugged design, potted electronics

SITRANS TW is a consistent further development of the hundred thousand times proven SITRANS T for the 4wire system in the mounting rail housing. Its many new functions set new standards in temperature transmitters. Its diagnostic and simulation functions provide the necessary clarity during commissioning and operation. Its HART®-interface makes the SITRANS TW easily adaptable to any measuring job with SIMATIC PDM.

Physical values can be preset with the simulation function. This enables testing of the complete signal path right as far as the control system without the need for tools. The drag pointer functions measure the system’s process variable minimum and maximum.

All SITRANS TW control room devices are available in non-intrinsically safe versions and intrinsically safe versions for applications under extreme conditions.

• Explosion protection [EEx ia] or [EEx ib] for measurements with sensors in the hazardous area
• Temperature-linear characteristic for all temperature sensors
• Temperature-linear characteristic can be selected for all temperature 
  sensors
• Diagnostic functions
• Slave pointer functions